Back To Top
DeltaV™ Smart Switches
PDP_DeltaV Smart Switches
The DeltaV™ Network Smart Switches are the next generation in the use of commercial off-the-shelf (COTS) components in control systems.
Called purpose-built commercial components, these switches combine the lower cost of off-the-shelf components with DeltaV specific software and features to make them more integrated. This purpose-built switch allows the DeltaV system to provide an auto port lockdown advanced security feature that is easy for a control system user to implement.
DeltaV™ Smart Switches


Network Storm Protection
Network Storm Protection Packet rate limiting enabled with fixed rate setting and network loop protection.
Front panel LEDs, signal contact in addition to DeltaV Network Device Command Center: DeltaV Smart Switches also support internal log-files and syslog servers
No setup is required for switching functions. DeltaV Network Device Command Center application is for diagnostic and alerts
DeltaV Auto port lockdown, view-only Network Device Command Center for monitoring: All user access is authenticated using local DeltaV user passwords
Standard DeltaV network redundancy
Real-time clock. The switch supports Network Time Servers as a client
Conformal Coating
Applicable to the FP20-Series and MD20/30-Series extended specification models only
Harsh Area Rating to G3
G2 rating. FP20-Series and MD20/30-Series extended specification models can be used in G3 environments, but they are not certified to G3
Operating Temperature
FP20-Series and MD20/30-Series based on standard models: 0 to 60° C (32 to 140° F). FP20-Series and MD20/30-Series based on extended specifications: -40 to 70° C (-40 to 158° F). RM100-Series and the RM104: 0 to 50° C (32 to 122°
Storage Temperature
FP20-Series and MD20/30-Series all models: -40 to 85° C (-40 to 185° F). RM100-Series and the RM104: -20 to 85° C (-2 to 185° F)
Relative humidity
5 to 95%, non-condensing
10 g ½-sine wave for 11 ms
1 mm peak-to-peak from 5 Hz to 16 Hz, 0.5 g from 16 Hz to 150 Hz


  • Completely managed by DeltaV™ systems
  • Operators and maintenance stations will automatically receive device alerts indicating network communications irregularities
  • Requires no user configuration to fully support DeltaV™ network communications
  • With the one-click lockdown capability built into the switch, you can automatically lock all unused network ports in the system with a single button click in the DeltaV™ Network Device Command Center application
  • Meets a wide variety of network requirements


Interesting in attending a training class?

Visit Course Listing!