Back To Top
Daniel, Series 700 Control Valve, 12 IN (DN300)
Precisely control the flow of liquid petroleum products with Daniel™ Series 700 External Pilot Operated Control Valves that ensure positive sealing, smooth linear action and uniform speed of response.
This versatile, cost-effective line enables a single valve body to be equipped with a variety of external pilots, allowing one valve to serve multiple functions. Unit-built construction allows all internal parts to be removed without interfering with the valve body or connections, simplifying maintenance and maximizing uptime.
Daniel, Series 700 Control Valve, 12 IN (DN300)


Line Size
DN50 to DN400 (2-in to 16-in)
Fluid Type
Operating Temperature Range
-29°C to +66°C (-20°F to +150°F)
Operating Pressure Range
ANSI 150 to 600
Materials: Valve Body
Carbon Steel, ASTM A352 GR LCC
Materials: Valve Cylinder
DN50 to DN 200 (2-in to 4-in): Stainless Steel, ANSI 150 to 600; DN250 to DN 400 (6-in to 16-in) Carbon Steel, Nickel Coated, ANSI 150 to 600
Materials: Valve Piston
Standard: Stainless Steel
Materials: Seat Ring
DN50 to DN200 (2-in to 6-in) Stainless Steel; DN300 to DN400 (8-in to 16-in) Carbon Steel, Nickel Coated
Materials: O-Rings
Standard: Viton; Optional: Neoprene, EPR, Viton, all Buna-N, Kalrez / Teflon AP (Aggressive Products)


  • Achieve precise flow rate and batch control with high-performance balanced piston principle, spring-biased design
  • Avoid damage due to shock pressure by adjusting closing speed; main piston ensures uniform opening and closing
  • Ensure smooth linear action with maximum flow and minimum pressure drop with high-capacity, 45° valve body
  • Control pressure from 10 to 1440 psi (60 to 9928 kPa) within ±2 psi (±13.8 kPa) of setpoint
  • Safeguard equipment and personnel with positive shutoff (ANSI Class VI) and fail-safe closure upon power loss
  • Improve reliability with positive O-ring seal and valve seats that are unaffected by fluid viscosity or pressure drop
  • Maximize uptime with all internal parts housed in a cartridge assembly; no need to remove the valve from the line
  • Minimize wear-related maintenance with a simple design featuring no diaphragms or stuffing boxes


Interesting in attending a training class?

Visit Course Listing!